Cold Work Tool Steel

The hardness of aisi a2 tool steel is higher than SKD11 after heat treatment. It can reach a high hardness of 60-62HRC after tempering at high temperature (500-520℃), and exceeds SKD11 in strength. aisi a2 tool steel is an air-cooled hardenable chromium steel with excellent toughness and high wear resistance. Small heat treatment deformation.Our company provides aisi a2 steel Round Bar or aisi a2 steel plates etc.

MnCrWV is a low-deformation cold work die steel. MnCrWV steel is a high carbon alloy tool steel. The steel has excellent comprehensive properties and can be hardened by pin salt classification. It has high strength, good cutting performance and hardenability, and small heat treatment deformation.Our company provides MnCrWV round rods and MnCrWV steel plates

Cr5Mo1V is a air-quenching mold steel with deep air-quenching hardening properties, which is extremely beneficial for complex molds that require that their shape must be maintained after quenching and tempering. The deformation of this steel due to air quenching is only about 1/4 of that of manganese-containing oil-quenched tool steel. Its wear resistance is between manganese type and high carbon and high chromium type tool steel. Its toughness is better than any other type, especially Suitable for tools that require good wear resistance and special toughness.Our company provides Cr5Mo1V steel round bar and Cr5Mo1V mould steel plate

SKS31 Cold Work Die Steel has high hardenability. Since tungsten forms carbides, this steel has more excess carbides and higher hardness and wear resistance than chromium steel and 9SiCr steel after quenching and low-temperature tempering. In addition, tungsten also helps preserve fine grains, giving the steel better toughness. Therefore, cutting tools made of SKS31 steel have less chipping and can better maintain the shape and size of the blade.Our company providesTool Steel Round Bar SKS31 and SKS31 cold work die steel plate for tool

9Mn2V Cold Work Die Steel is a low-alloy tool steel with better comprehensive mechanical properties than carbon tool steel. It is the only economical steel type among alloy tool steels that does not contain Ni and Cr elements

Cold Work Die Steel O7 is a high-carbon alloy tool steel with good toughness, good tempering stability, and small deformation during heat treatment. Our company provides AISI O7 Steel Round Bar and AISI O7 steel plates

CrWMn Cold Work Steel is the most commonly used high-carbon alloy tool steel for making molds. It is a widely used cold work mold steel and is known as "non-deformable steel". However, it is sensitive to the formation of network carbides

SKD12 alloy steel has medium alloy content. Because SKD12 steel contains molybdenum and vanadium, SKD12 steel has good hardenability, uniform carbide distribution, certain impact toughness and good wear resistance. SKD12 steel has good air quenching performance, small dimensional deformation during air quenching, better toughness than 9Mn2V and Cr12, uniform and fine carbides, and good wear resistance

Cr4W2MoV cold work die steel has high alloy tool steel and a high wear-resistant, micro-deformation . It is a new type of alloy cold work die steel independently developed in my country. This steel is a substitute steel developed to address the shortcomings of Cr12 series steel.Our company provides Carbon Round Steel Rod Cr4W2MoV or 4Cr4W2MoV hot-rolled materials and 4Cr4W2MoV forged materials.

Cr12W is the national standard GB executive standard steel grade. It is a high carbon C, chromium Cr cold work die steel. This steel contains about 0.70% of tungsten W, which makes it have high hardness, strength, wear resistance, toughness, and high hardenability. The hardenability and other process properties are 3 to 4 times higher than those of ordinary low alloy tool steel and the quenching volume deformation is small.Our company provides Cr12W round rods and Cr12W steel plates

DIN 1.2436 cold work die steel is German DIN standard extra high toughness chromium steel. Has extremely high wear resistance and edge retention capabilities. It is a widely used cold work die steel with high strength, good hardenability and good wear resistance, but poor impact toughness.Our company provides DIN 1.2436 steel plates and DIN 1.2436 Cold Work Mold Steel Round Bar

SKD11 is precision stamping mold steel、Ledeburitic 12% chrome steel, very high resistanceagainst abrasive and adhesive wear due to a highvolume of hard carbides in the steel matrix, goodtoughness,very gooddimensional stability, highcompressive strength, very good base material forPVD/CVD coating as well as nitriding due to itssecondary hardening properties.The corresponding grade of SKD11 is Equivalant to DIN 1.2379 、JIS SKD11 tool steel or GB Cr12Mo1V1