Products

DIN1.2601 is a general-purpose cold work die steel with high wear resistance and toughness, high carbon and high chromium alloy tool steel and vacuum degassed refined steel. The steel is pure, has good hardenability and small quenching deformation. This steel has been softened by spheroidizing annealing and has good processability. The carbide particles are fine and uniform, so there is no need to worry about quenching cracking. Special additions of strengthening elements molybdenum and vanadium are required.The corresponding foreign brand of 1.2601 is Cr12MoV steel、AISI D5、JIS SKD10

AISI H11 (DIN 1.2343) is one of the hot work chromium type tool steels belong to ASTM A681 standard. It has good strength in high temperature, excellent toughness and ductility in all z directions, excellent hardenability, and a high level of thermal shock and thermal fatigue resistance. AISI H11 /1.2343 steel can be deeply hardened by heat treatment and air quenching.

AISI H13 tool steel / 1.2344 is characterized by its high hardness, wear resistance, toughness, and corrosion resistance. AISI H13 steel / 1.2344 can withstand high temperature and high pressure loads. AISI H13 steel / 1.2344 can reduce the tooling wear and improve production efficiency.

DIN 1.2436 cold work die steel is German DIN standard extra high toughness chromium steel. Has extremely high wear resistance and edge retention capabilities. It is a widely used cold work die steel with high strength, good hardenability and good wear resistance, but poor impact toughness.Our company provides DIN 1.2436 steel plates and DIN 1.2436 Cold Work Mold Steel Round Bar

SKD61 Hot Work Die Steel is a medium alloy hot work die steel containing silicon, chromium, molybdenum and vanadium. After quenching and tempering treatment, it obtains a martensitic structure with fine structure and moderate grains. It is basically distributed with fine carbides and has good properties. It has comprehensive mechanical properties and good hardenability, which is more suitable for manufacturing molds with large sizes and complex shapes.The corresponding foreign brand of SKD61 steel is 4Cr5MoSiV1 steel、DIN 1.2344、ASTM H13

AISI H13 / 1.2344  tool steel is characterized by its high hardness, wear resistance, toughness, and corrosion resistance. AISI H13 / 1.2344 steel can withstand high temperature and high pressure loads. AISI H13 steel /1.2344  can reduce the tooling wear and improve production efficiency.

The hardness of aisi a2 tool steel is higher than SKD11 after heat treatment. It can reach a high hardness of 60-62HRC after tempering at high temperature (500-520℃), and exceeds SKD11 in strength. aisi a2 tool steel is an air-cooled hardenable chromium steel with excellent toughness and high wear resistance. Small heat treatment deformation.Our company provides aisi a2 steel Round Bar or aisi a2 steel plates etc.

1.2343 steel is often used for highly stressed structural parts such as aircraft landing gear. lt resistssoftening at temperatures up to 537°C while retaining good ductility and toughness even atstrength levels on the order of 275 ksi. Tools for hot forging of light metal. Pressure die casting tools. Dies, mandrels, punchers, knives, moulds. This grade can be water cooled.The 1.2343 steel equivalent is AISI H11、X37CrMoV5、4Cr5MoSiV

This is a strong, high-quality spring steel with good hardenability, hot work performance, and comprehensive mechanical properties, often used for large, high-stress springs in automobiles, tractors, and industrial equipment.

80CrV2 (pronounced "eighty C-R-V-two") is a high-carbon, low-alloy steel known for its excellent combination of toughness, edge stability, and ease of sharpening. It's often described as a superior version of classic high-carbon steels like 1080, with improved hardenability and performance due to its small but effective alloying elements.

AISI H11 die steel is often used for highly stressed structural parts such as aircraft landing gear. H11 steel resistssoftening at temperatures up to 537°C while retaining good ductility and toughness even atstrength levels on the order of 275 ksi. Tools for hot forging of light metal. Pressure die castingtools. Dies, mandrels, punchers, knives, moulds. This grade can be water cooled.

SKD11 is precision stamping mold steel、Ledeburitic 12% chrome steel, very high resistanceagainst abrasive and adhesive wear due to a highvolume of hard carbides in the steel matrix, goodtoughness,very gooddimensional stability, highcompressive strength, very good base material forPVD/CVD coating as well as nitriding due to itssecondary hardening properties.The corresponding grade of SKD11 is Equivalant to DIN 1.2379 、JIS SKD11 tool steel or GB Cr12Mo1V1