9CrWMn Low Alloy Cold Work Die Steel

6CrW2Si has excellent wear resistance, toughness and hardness. Its high hardness and high toughness enable it to maintain the cutting performance of the tool during high-speed cutting, while also resisting the risk of wear and fracture. In addition, 6CrW2Si also has good thermal properties Stability and corrosion resistance, able to work stably in high temperature, high pressure and corrosive environmentsl ，we can provide 6CrW2Si round bar、6CrW2Si steel plate and so on.

CrWMn Cold Work Steel is the most commonly used high-carbon alloy tool steel for making molds. It is a widely used cold work mold steel and is known as "non-deformable steel". However, it is sensitive to the formation of network carbides

DIN 1.2080 / AISI D3 steel, American grade, high carbon, high chromium ledeburite steel. AISI D3 steel has high wear resistance, hardenability, hardenability, strength and toughness, thermal stability, compressive strength, micro deformation and excellent It has comprehensive properties, good mechanical processing and thermal oxidation resistance, and wide adaptability.The corresponding trademark of D3 steel in other countries is DIN 1.2080、JIS SKD1、Cr12

DIN1.2601 is a general-purpose cold work die steel with high wear resistance and toughness, high carbon and high chromium alloy tool steel and vacuum degassed refined steel. The steel is pure, has good hardenability and small quenching deformation. This steel has been softened by spheroidizing annealing and has good processability. The carbide particles are fine and uniform, so there is no need to worry about quenching cracking. Special additions of strengthening elements molybdenum and vanadium are required.The corresponding foreign brand of 1.2601 is Cr12MoV steel、AISI D5、JIS SKD10

Cr12 / DIN 1.2080 is suitable for making dies and punches, cold shear knives, drill sleeves, gauges, wire drawing dies, etc. that are subject to less impact load and require higher wear resistance.The corresponding trademark of Cr12 in other countries is DIN 1.2080、JIS SKD1、D3 steel

DIN 1.2436 cold work die steel is German DIN standard extra high toughness chromium steel. Has extremely high wear resistance and edge retention capabilities. It is a widely used cold work die steel with high strength, good hardenability and good wear resistance, but poor impact toughness.Our company provides DIN 1.2436 steel plates and DIN 1.2436 Cold Work Mold Steel Round Bar

The hardness of aisi a2 tool steel is higher than SKD11 after heat treatment. It can reach a high hardness of 60-62HRC after tempering at high temperature (500-520℃), and exceeds SKD11 in strength. aisi a2 tool steel is an air-cooled hardenable chromium steel with excellent toughness and high wear resistance. Small heat treatment deformation.Our company provides aisi a2 steel Round Bar or aisi a2 steel plates etc.

SKD11 is precision stamping mold steel、Ledeburitic 12% chrome steel, very high resistanceagainst abrasive and adhesive wear due to a highvolume of hard carbides in the steel matrix, goodtoughness,very gooddimensional stability, highcompressive strength, very good base material forPVD/CVD coating as well as nitriding due to itssecondary hardening properties.The corresponding grade of SKD11 is Equivalant to DIN 1.2379 、JIS SKD11 tool steel or GB Cr12Mo1V1

AISI d2 tool steel is used for metal stamping dies, drawing dies, stainless steel punching dies, high hardness punching dies, cutting dies, thread rolling dies, hardware parts manufacturing, machinery manufacturing, etc.The corresponding foreign brand of aisi d2 metal is 1.2379 steel、Cr12Mo1V1 steel、JIS SKD11

DIN 1.2379 steel is Ledeburitic 12% chrome steel, very high resistanceagainst abrasive and adhesive wear due to a highvolume of hard carbides in the steel matrix, goodtoughness,very gooddimensional stability, highcompressive strength, very good base material forPVD/CVD coating as well as nitriding due to itssecondary hardening properties.