Cr12

DIN 1.2379 steel is Ledeburitic 12% chrome steel, very high resistanceagainst abrasive and adhesive wear due to a highvolume of hard carbides in the steel matrix, goodtoughness,very gooddimensional stability, highcompressive strength, very good base material forPVD/CVD coating as well as nitriding due to itssecondary hardening properties.

D3 / DIN 1.2080 is suitable for making dies and punches, cold shear knives, drill sleeves, gauges, wire drawing dies, etc. that are subject to less impact load and require higher wear resistance.The corresponding foreign brand of D3 is JIS SKD1、DIN 1.2080、Cr12 steel

Cr12W is the national standard GB executive standard steel grade. It is a high carbon C, chromium Cr cold work die steel. This steel contains about 0.70% of tungsten W, which makes it have high hardness, strength, wear resistance, toughness, and high hardenability. The hardenability and other process properties are 3 to 4 times higher than those of ordinary low alloy tool steel and the quenching volume deformation is small.Our company provides Cr12W round rods and Cr12W steel plates

Cr12Mo1V1 / DIN 1.2379 is a widely used high-carbon, high-chromium cold work die steel in the world. It is a ledeburite steel with high hardenability, hardenability and high wear resistance. It has good high-temperature oxidation resistance and is resistant to corrosion after quenching and polishing. It has good corrosion resistance and small heat treatment deformation.The corresponding foreign brand of H13 is ASTM D2、DIN 1.2379、JIS SKD11

Cr12Mo1V1 ledeburite steel is a widely used high-carbon, high-chromium cold work die steel in the world. It is a ledeburite steel with high hardenability, hardenability and high wear resistance. It has good high-temperature oxidation resistance and is resistant to corrosion after quenching and polishing. It has good corrosion resistance and small heat treatment deformation.

Cr12MoV steel has good wear resistance, hardenability, toughness, thermal stability, compressive strength, micro-deformation, excellent overall performance and wide adaptability. Cr12MoV is used to manufacture various cold stamping molds and tools with large cross-sections, complex shapes, and heavy working conditions, such as punching dies, trimming dies, rolling dies, steel plate Cr12Mov thick plate deep drawing dies, round Saws, standard tools and gauges, thread rolling dies, etc. The corresponding trademark of Cr12MoV in other countries is JIS SKD10、DIN 1.2601、D5 steel

DIN 1.2080 / AISI D3 steel, American grade, high carbon, high chromium ledeburite steel. AISI D3 steel has high wear resistance, hardenability, hardenability, strength and toughness, thermal stability, compressive strength, micro deformation and excellent It has comprehensive properties, good mechanical processing and thermal oxidation resistance, and wide adaptability.The corresponding trademark of D3 steel in other countries is DIN 1.2080、JIS SKD1、Cr12

Cr12 / DIN 1.2080 is suitable for making dies and punches, cold shear knives, drill sleeves, gauges, wire drawing dies, etc. that are subject to less impact load and require higher wear resistance.The corresponding trademark of Cr12 in other countries is DIN 1.2080、JIS SKD1、D3 steel

Cr4W2MoV cold work die steel has high alloy tool steel and a high wear-resistant, micro-deformation . It is a new type of alloy cold work die steel independently developed in my country. This steel is a substitute steel developed to address the shortcomings of Cr12 series steel.Our company provides Carbon Round Steel Rod Cr4W2MoV or 4Cr4W2MoV hot-rolled materials and 4Cr4W2MoV forged materials.

SKD10 special steel is high carbon, high chromium type ledeburite cold work die steel, cobalt is not a required component unless there are special requirements. SKD10 mold steel has good hardenability, small heat treatment deformation, wear resistance and impact resistance