Products

DIN 1.2344 Steel is pressure-resistant hot work die steel. DIN 1.2344 steel has been remelted by electro slag and has uniform material and good hardenability. DIN 1.2344 steel has excellent machining performance and polishing performance, high toughness and plasticity, good high and low temperature wear resistance, high temperature fatigue resistance and heat resistance.The corresponding trademark of DIN 1.2344 steel in other countries is H13 steel,SKD61 tool steel,GB 4Cr5MoSiV1.

AISI H11 / 1.2343 tool steel is often used for highly stressed structural parts such as aircraft landing gear. AISI H11 / 1.2343 tool steel resistssoftening at temperatures up to 537°C while retaining good ductility and toughness even atstrength levels on the order of 275 ksi. Tools for hot forging of light metal. Pressure die castingtools. Dies, mandrels, punchers, knives, moulds.The corresponding trademark of AISI H11 steel in other countries is X37CrMoV5、1.2343、GB 4Cr5MoSiV

DIN 1.2379 steel is Ledeburitic 12% chrome steel, very high resistanceagainst abrasive and adhesive wear due to a highvolume of hard carbides in the steel matrix, goodtoughness,very gooddimensional stability, highcompressive strength, very good base material forPVD/CVD coating as well as nitriding due to itssecondary hardening properties.

AISI m2 tool steel is molybdenum high speed steel with the advantages of small carbide unevenness and high toughness. AISI m2 steel is easy to overheat, so the quenching heating temperature should be strictly controlled, and the heat treatment protection requirements are strict. Due to hss M2 good hardness and wear resistance, AISI m2 steel is often used to make tools for cutting difficult materials. M2 high speed tool steel has a greater tendency to carbide, so hss M2 has strict requirements for heat treatment protection and is suitable for molds that can withstand vibration and impact loads

D3 / DIN 1.2080 is suitable for making dies and punches, cold shear knives, drill sleeves, gauges, wire drawing dies, etc. that are subject to less impact load and require higher wear resistance.The corresponding foreign brand of D3 is JIS SKD1、DIN 1.2080、Cr12 steel

Our products such as cnc machining parts,casting parts,sheet metal stamping parts,forging parts,fasteners and plastic injection parts have been export to many countries like Kazakhstan，Russia, Germany, America and so on.

4Cr5MoSiV1 / 1.2344 Hot Work Mold Steel is a high-quality tool steel material with high hardness, excellent cutting stability, wear resistance, heat treatment stability and thermal conductivity. It plays an important role in the manufacturing of various cold work molds and cutting tools, meeting the needs for high strength, high hardness and high wear resistance.The corresponding foreign brand of 4Cr5MoSiV1 is SKD61、1.2344、H13

1. Wear Resistance: - Vanadium carbides (VC) significantly improve abrasion resistance - Suitable for processing hard particulate materials 2. Thermal Stability: - Short-term service temperature up to 450℃ - Outperforms conventional CrWMn steels 3. Processability: - Forging temperature range: 1100-850℃ - Annealed hardness: ≤229HB

Cr12Mo1V1 / DIN 1.2379 is a widely used high-carbon, high-chromium cold work die steel in the world. It is a ledeburite steel with high hardenability, hardenability and high wear resistance. It has good high-temperature oxidation resistance and is resistant to corrosion after quenching and polishing. It has good corrosion resistance and small heat treatment deformation.The corresponding foreign brand of H13 is ASTM D2、DIN 1.2379、JIS SKD11

8Cr3 Hot Work Die steel is formed by adding a certain amount of chromium (3.20% to 3.80%) to carbon tool T8. Due to the presence of chromium, this steel has good hardenability and certain room temperature and high temperature strength, and forms fine, evenly distributed carbides.Our company provides 8Cr3 round rods and 8Cr3 steel plates

1.2714 steel is a kind of mold steel with excellent performance. It is usually called 5CrNiMo steel in China. It has high heat resistance, high wear resistance and excellent toughness and strength, and is widely used in the mold manufacturing industry.The types of supplies include 1.2714 mold steel cold drawn carbon steel bars etc

AISI H10 hot work tool steel is a chromium-molybdenum hot work steel that exhibits excellent resistance to softening at elevated temperature. This grade is very resistant to thermal fatigue cracking (heat checking), and can be water cooled in service。The corresponding trademark of AISI H10 in other countries is JIS SKD7,DIN1.2365,GB 4Cr3Mo3SiV