Products

DIN1.2601 is a general-purpose cold work die steel with high wear resistance and toughness, high carbon and high chromium alloy tool steel and vacuum degassed refined steel. The steel is pure, has good hardenability and small quenching deformation. This steel has been softened by spheroidizing annealing and has good processability. The carbide particles are fine and uniform, so there is no need to worry about quenching cracking. Special additions of strengthening elements molybdenum and vanadium are required.The corresponding foreign brand of 1.2601 is Cr12MoV steel、AISI D5、JIS SKD10

42CrMo steel is an ultra-high-strength steel with high strength and toughness, good hardenability, no obvious temper brittleness, small deformation during quenching, and high fatigue limit and multiple impact resistance after quenching and tempering. It has good low-temperature impact toughness and high creep strength and durable strength at high temperatures.

9Cr18 steel is a high-carbon, high-chromium martensitic stainless steel that has high hardness, high wear resistance and corrosion resistance after quenching. This steel is suitable for manufacturing plastic molds that withstand high wear resistance, high load and corrosive media. It is commonly used as stainless slicing mechanical cutting tools and shearing tools, surgical blades, high wear-resistant equipment parts, etc.Our company provides 9Cr18 cold-drawn round stainless steel,9Cr18 wire rod stainless steel, 9Cr18 alloy steel hot-rolled round steel, and 9Cr18alloy steel hot-rolled steel plates.

German mold steel 1.2311 . This steel is produced through an "ultra-pure" process and is pre-hardened. 1.2311 steel shows a high degree of micro-purity and excellent homogeneous structure, excellent polishability and photo-etching properties. After heat treatment, DIN 1.2311 tool steel has good processing and polishing properties, can be nitrided, and is suitable for surface treatments such as chrome plating. The material has uniform hardness (up to 400mm thick), good toughness, and good machining performance

SKS93 high-speed tool steel, Japan's Hitachi constant-type oil steel series, is an improved steel type SK-3. Because the manganese and chromium and other ingredients are used to improve oil recovery and quenching, it can avoid quenching cracks and deformation that are easy to cause when ordinary high-carbon steel is quenched. It can obtain better sharpness and hardening ability (deeper hardening depth) than SK-3. Easy to process, with high hardness and wear resistance of general high carbon steel.

DIN 1.2080 / AISI D3 steel, American grade, high carbon, high chromium ledeburite steel. AISI D3 steel has high wear resistance, hardenability, hardenability, strength and toughness, thermal stability, compressive strength, micro deformation and excellent It has comprehensive properties, good mechanical processing and thermal oxidation resistance, and wide adaptability.The corresponding trademark of D3 steel in other countries is DIN 1.2080、JIS SKD1、Cr12

Cr12 / DIN 1.2080 is suitable for making dies and punches, cold shear knives, drill sleeves, gauges, wire drawing dies, etc. that are subject to less impact load and require higher wear resistance.The corresponding trademark of Cr12 in other countries is DIN 1.2080、JIS SKD1、D3 steel

American High Carbon High Austenitic Steel SKD1 / 1.2080,The types of supplies include hot-rolled materials, cold-drawn materials, forged materials, hot-rolled steel plates, and cold-drawn steel wires.Our company provides SKD1 Forged steel Alloy Round Bar and SKD1 steel  / 1.2080 steel plates

5CrMnMo hot work die steel is a nickel-free hammer forging die steel with properties close to those of 5CrNiMo steel. Suitable for making medium-sized hammer forging dies with side length ≤400mm.Our company provides Carbon steel round bar 5CrMnMo and 5CrMnMo carbon steel square bar、Hammer forging die steel 5CrMnMo。

SKD5 Hot Work Die Steel is a commonly used die-casting mold steel. The carbon content is low, and it has high toughness and good thermal conductivity; at the same time, it contains more carbide-forming elements chromium, tungsten, and vanadium, and the phase transformation temperature increases, giving the steel high high-temperature strength, hardness, and good heat resistance. Fatigue; hardenable.Our company provides JIS SKD5 Hot Work Tool Round Bar and JIS SKD5 steel plates

1.2367 Hot work tool steel. Secondary hardening steel with high strength and wear resistance in hotGood tempering resistance. 1.2367 steel has High hardenability and toughness. Tools can be water cooled.we can provide 1.2367 ESR round bar and Alloy steel flats 1.2367

SKT4 Alloy Tool Steel has good toughness, strength and high wear resistance,It can be used to manufacture various large and medium-sized forging dies.The corresponding foreign brand of SKT4 is ASTM L6、DIN 1.2714、5CrNiMo