Products
The advantages of SM45 steel are that it is cheap, has good cutting performance, has high hardness after quenching, and has good strength, toughness and certain wear resistance after quenching and tempering. It is widely used in the manufacture of medium and small, medium and low-grade products. Plastic mold,Our company provides SM45 Carbon Steel Round Bar, SM45 Mould Steel Plate, hot rolled round bars SM45, etc.
3Cr2Mo steel is a general-purpose pre-hardened plastic mold steel that is currently widely used in various countries. Pre-hardened plastic mold steel converted from American AISI P20 and has been included in the national standard.Our company can provide 3Cr2Mo mould steel round bar and best quality 3Cr2Mo mould steel plate.
SKD10 special steel is high carbon, high chromium type ledeburite cold work die steel, cobalt is not a required component unless there are special requirements. SKD10 mold steel has good hardenability, small heat treatment deformation, wear resistance and impact resistance
7CrSiMnMoV is Flame quenched cold work die steel,7CrSiMnMoV is New low alloy air cooled hardened steel,7CrSiMnMoV steel has good hardenability and can be hardened by air cooling. Its hardness can reach HRC62~64 and has small deformation after air cooling and quenching. This steel not only has high strength but also has excellent toughness.It has the advantages of easy operation, low cost and energy saving.Our company provides7CrSiMnMoV Alloy Steel Round Bar Rod etc.
O2 Steel is an oil hardening tool steel which is supplied in the annealed condition and characterised by its characteristics of offering good durability. O2 tool steel is with excellent wear resistance and its ability to hold a good cutting edge.
Cr8Mo2SiV series high carbon medium chromium cold work die steel, which is a new tool steel designed and developed on the basis of SKD11 high-carbon high-chromium ledeburite cold-working die steel. Its characteristic is to inhibit the formation of ledeburite eutectic by reducing the content of carbon and chromium.Our company provides 4Cr3Mo3SiV steel strip, 4Cr3Mo3SiV wire, 4Cr3Mo3SiV forged rod, etc.
Cold Work Drawn Steel JIS SKS3 has high toughness, high hardness, air-cooling quenching and high chromium tool steel, which is better in hardness and toughness than SKD steel
SKS31 Cold Work Die Steel has high hardenability. Since tungsten forms carbides, this steel has more excess carbides and higher hardness and wear resistance than chromium steel and 9SiCr steel after quenching and low-temperature tempering. In addition, tungsten also helps preserve fine grains, giving the steel better toughness. Therefore, cutting tools made of SKS31 steel have less chipping and can better maintain the shape and size of the blade.Our company providesTool Steel Round Bar SKS31 and SKS31 cold work die steel plate for tool
Cold Work Drawn Alloy steel SKD12 has medium alloy content. Because it contains molybdenum and vanadium, it has good hardenability, uniform carbide distribution, certain impact toughness and good wear resistance. It has good air quenching performance, small dimensional deformation during air quenching, better toughness than 9Mn2V and Cr12, uniform and fine carbides, and good wear resistance.SKD12 is air quenching mold steel.
SKD2 cold work mold steel has high-carbon, high-chromium with excellent wear resistance and impact resistance. Its chemical composition and heat treatment process have an important impact on its performance.Our company provides SKD2 cold work die steel plate for tool and JIS SKD2 Cold Work Tool Steel Round Bar
9CrWMn mold steel is low alloy cold work mold steel. This steel has certain hardenability and wear resistance, small quenching deformation, uniform carbide distribution and fine particles.Our company provides 9CrWMn round rods and 9CrWMn steel plates
SKD12 alloy steel has medium alloy content. Because SKD12 steel contains molybdenum and vanadium, SKD12 steel has good hardenability, uniform carbide distribution, certain impact toughness and good wear resistance. SKD12 steel has good air quenching performance, small dimensional deformation during air quenching, better toughness than 9Mn2V and Cr12, uniform and fine carbides, and good wear resistance
Recommend
AISI H11 (DIN 1.2343) is one of the hot work chromium type tool steels belong to ASTM A681 standard. It has good strength in high temperature, excellent toughness and ductility in all z directions, excellent hardenability, and a high level of thermal shock and thermal fatigue resistance. AISI H11 /1.2343 steel can be deeply hardened by heat treatment and air quenching.
AISI H13 tool steel / 1.2344 is characterized by its high hardness, wear resistance, toughness, and corrosion resistance. AISI H13 steel / 1.2344 can withstand high temperature and high pressure loads. AISI H13 steel / 1.2344 can reduce the tooling wear and improve production efficiency.
DIN 1.2436 cold work die steel is German DIN standard extra high toughness chromium steel. Has extremely high wear resistance and edge retention capabilities. It is a widely used cold work die steel with high strength, good hardenability and good wear resistance, but poor impact toughness.Our company provides DIN 1.2436 steel plates and DIN 1.2436 Cold Work Mold Steel Round Bar
AISI H13 / 1.2344 tool steel is characterized by its high hardness, wear resistance, toughness, and corrosion resistance. AISI H13 / 1.2344 steel can withstand high temperature and high pressure loads. AISI H13 steel /1.2344 can reduce the tooling wear and improve production efficiency.