Alloy Steel 9Cr18

42CrMo steel is an ultra-high-strength steel with high strength and toughness, good hardenability, no obvious temper brittleness, small deformation during quenching, and high fatigue limit and multiple impact resistance after quenching and tempering. It has good low-temperature impact toughness and high creep strength and durable strength at high temperatures.

9SiCr steel has good forging properties. Because it is easy to decarburize, 9SiCr steel needs to be heated in a neutral atmosphere or protective atmosphere furnace. By applying forging heat quenching and tempering treatment, a fine tempered sorbite structure can be obtained, which simplifies the process, saves time and energy, and has both good cutting performance and ideal waste heat treatment structure.The corresponding trademark of 9SiCr steel in other countries is DIN 1.2067、DIN 100Cr6、L3 steel.

Q235 ordinary carbon structural steel is also called A3 plate.Q in Q235 represents the yield limit of this material, and the following 235 refers to the yield value of this material, which is around 235MPa. And as the thickness of the material increases, its yield value decreases. Because the carbon content is moderate, the comprehensive performance is good, the strength, plasticity and welding properties are well matched, and it is the most widely used. Mainly used in construction and engineering structures. It is used to make steel bars or construct factory building frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc. It is also widely used as mechanical parts that do not have high performance requirements.Our company can provide Q235 wire rod or round steel, square steel, flat steel, angle steel, etc.

4140 steel. This steel has good processability, minimal processing deformation, and very good fatigue resistance. 4140 tool steel is a medium-hardenability steel. After heat treatment, 4140 tool steel has good strength and good comprehensive mechanical properties. It has good processability and good yield rate. High. The maximum operating temperature is 427 degrees Celsius. 4140 steel has high strength, hardenability, good toughness, small deformation during quenching, and high creep strength and durable strength at high temperatures.Our company are tool steel suppliers。

35crmo is made of alloy steel. This steel is used to manufacture important parts in various machines that withstand impact, bending and torsion, and high loads, such as rolling mill herringbone gears, crankshafts, hammer rods, connecting rods, fasteners, turbine engine spindles, axles, and engine transmissions. Parts, large motor shafts, punches in petroleum machinery, etc.Our company provides 35CrMo Seamless steel pipe, 35CrMo steel bar, etc.

4140 tool steel has good processability, minimal processing deformation, and very good fatigue resistance. 4140 tool steel is a medium-hardenability steel. After heat treatment, 4140 steel has good strength and good comprehensive mechanical properties. It has good processability and good yield rate. High. The maximum operating temperature is 427 degrees Celsius. 4140 steel has high strength, hardenability, good toughness, small deformation during quenching, and high creep strength and durable strength at high temperatures

This is a strong, high-quality spring steel with good hardenability, hot work performance, and comprehensive mechanical properties, often used for large, high-stress springs in automobiles, tractors, and industrial equipment.

80CrV2 (pronounced "eighty C-R-V-two") is a high-carbon, low-alloy steel known for its excellent combination of toughness, edge stability, and ease of sharpening. It's often described as a superior version of classic high-carbon steels like 1080, with improved hardenability and performance due to its small but effective alloying elements.

1. Wear Resistance: - Vanadium carbides (VC) significantly improve abrasion resistance - Suitable for processing hard particulate materials 2. Thermal Stability: - Short-term service temperature up to 450℃ - Outperforms conventional CrWMn steels 3. Processability: - Forging temperature range: 1100-850℃ - Annealed hardness: ≤229HB

Medium carbon chromium-molybdenum alloy steel SCM440, an alloy steel containing chromium and molybdenum. It has the advantages of stable composition, low harmful elements, high steel purity, small decarburization layer, and few surface defects. Easy to spheroidize and has low cold cracking rate. Alloy steel SCM440 is usually hardened and tempered. The ultimate tensile strength is 850-1000Mpa. This material strikes a very good balance between strength, toughness and wear resistance. The alloy's chromium content provides good hardness penetration, while the molybdenum element imparts average hardness and high strength. Alloy steel SCM440 responds well to heat treatment and is easy to process under heat treatment conditions. This material offers many desirable properties such as good strength and wear resistance, excellent toughness, good ductility and resistance to high temperature stress.Our company can provide SCM440 hot-rolled or forged materials, etc.