T10 Alloy & Tool Steel
T10 steel is a high carbon tool steel with good hardness and wear resistance. It is suitable for making cutting tools and stamping dies. Its advantages include moderate hardness, strong toughness, low production cost, after heat treatment hardness can reach more than 60HRC. However, the hardenability of T10 Steel is low, heat resistance is poor, in the quenching heating is not easy to overheat, still maintain fine grain. In addition, toughness, strength and wear resistance are higher than T7-T9, but the thermal hardness is low, hardenability is still not high, quenching deformation
- Shizhang Steel
- China
- 15-45days
- 500 Tons/Month
Product Name: ALLOY & TOOL STEEL---T10
Similar steel grades:
U.S.A | W1-91/2 |
German | DIN 1.1645 |
Japan | JIS SK105/SK95 |
Austria | - |
Sweden | 1880 |
China | T10 |
Chemical composition:
Standard | C | Si | Mn |
GB/T1299-2014 | 0.85-0.94 | ≤0.35 | ≤0.40 |
Principal Feature:
T10 steel is a high carbon tool steel with good hardness and wear resistance. It is suitable for making cutting tools and stamping dies. Its advantages include moderate hardness, strong toughness, low production cost, after heat treatment hardness can reach more than 60HRC. However, the hardenability of T10 Steel is low, heat resistance is poor, in the quenching heating is not easy to overheat, still maintain fine grain. In addition, toughness, strength and wear resistance are higher than T7-T9, but the thermal hardness is low, hardenability is still not high, quenching deformation
Typical Application:
It is commonly used for making long-cut blades and light-duty and small cold punching (punch) . Hardened plastic die steels are suitable for smaller plastic dies with low stress, simple shape and low deformation requirements. Used for core, punch, cavity plate, inlay, quench hardness 4652hrc, can also be used for small core and thermal plastic mold parts.
Heat Treatment:
Quenching, 760～780℃ water cooling,.
Size available:
Bars | Turned | Dia 90-505mm |
Black | Dia 60-550mm | |
Flats | Milled | T: 70-320 W: 90-1000mm |
Black | T: 50-320 W: 90-1000mm |
Are you trading company or manufacturer ?
We are an excellent trading company with strong supply chain and distribution network, efficiency organization and coordination skills. We also win good reputation from our customers.Could you customize as our request?
Yes,absolutely, only if you just tell your demands, we can offer the customized solution for you, such as material, hardness, thickness,width and so on.What about the payment terms ?
We accept different kinds of payment terms like T/T, L/C , Cash, Western Union etc .Do you provide samples ?
Yes ,we would provide samples For Free . The courier freight will be covered by customer's account.How can I visit your company ?
Welcome to visit our company at any time. We will help you accessing the business visa to China . Assist arranging your schedule in China ,including the factory visiting , products quality checking , car picking up, hotel booking , food service etc.
Related Products
42CrMo steel is an ultra-high-strength steel with high strength and toughness, good hardenability, no obvious temper brittleness, small deformation during quenching, and high fatigue limit and multiple impact resistance after quenching and tempering. It has good low-temperature impact toughness and high creep strength and durable strength at high temperatures.
9SiCr steel has good forging properties. Because it is easy to decarburize, 9SiCr steel needs to be heated in a neutral atmosphere or protective atmosphere furnace. By applying forging heat quenching and tempering treatment, a fine tempered sorbite structure can be obtained, which simplifies the process, saves time and energy, and has both good cutting performance and ideal waste heat treatment structure.The corresponding trademark of 9SiCr steel in other countries is DIN 1.2067、DIN 100Cr6、L3 steel.
Q235 ordinary carbon structural steel is also called A3 plate.Q in Q235 represents the yield limit of this material, and the following 235 refers to the yield value of this material, which is around 235MPa. And as the thickness of the material increases, its yield value decreases. Because the carbon content is moderate, the comprehensive performance is good, the strength, plasticity and welding properties are well matched, and it is the most widely used. Mainly used in construction and engineering structures. It is used to make steel bars or construct factory building frames, high-voltage transmission towers, bridges, vehicles, boilers, containers, ships, etc. It is also widely used as mechanical parts that do not have high performance requirements.Our company can provide Q235 wire rod or round steel, square steel, flat steel, angle steel, etc.
4140 steel. This steel has good processability, minimal processing deformation, and very good fatigue resistance. 4140 tool steel is a medium-hardenability steel. After heat treatment, 4140 tool steel has good strength and good comprehensive mechanical properties. It has good processability and good yield rate. High. The maximum operating temperature is 427 degrees Celsius. 4140 steel has high strength, hardenability, good toughness, small deformation during quenching, and high creep strength and durable strength at high temperatures.Our company are tool steel suppliers。
35crmo is made of alloy steel. This steel is used to manufacture important parts in various machines that withstand impact, bending and torsion, and high loads, such as rolling mill herringbone gears, crankshafts, hammer rods, connecting rods, fasteners, turbine engine spindles, axles, and engine transmissions. Parts, large motor shafts, punches in petroleum machinery, etc.Our company provides 35CrMo Seamless steel pipe, 35CrMo steel bar, etc.
4140 tool steel has good processability, minimal processing deformation, and very good fatigue resistance. 4140 tool steel is a medium-hardenability steel. After heat treatment, 4140 steel has good strength and good comprehensive mechanical properties. It has good processability and good yield rate. High. The maximum operating temperature is 427 degrees Celsius. 4140 steel has high strength, hardenability, good toughness, small deformation during quenching, and high creep strength and durable strength at high temperatures
This is a strong, high-quality spring steel with good hardenability, hot work performance, and comprehensive mechanical properties, often used for large, high-stress springs in automobiles, tractors, and industrial equipment.
80CrV2 (pronounced "eighty C-R-V-two") is a high-carbon, low-alloy steel known for its excellent combination of toughness, edge stability, and ease of sharpening. It's often described as a superior version of classic high-carbon steels like 1080, with improved hardenability and performance due to its small but effective alloying elements.
1. Wear Resistance:
- Vanadium carbides (VC) significantly improve abrasion resistance
- Suitable for processing hard particulate materials
2. Thermal Stability:
- Short-term service temperature up to 450℃
- Outperforms conventional CrWMn steels
3. Processability:
- Forging temperature range: 1100-850℃
- Annealed hardness: ≤229HB
Medium carbon chromium-molybdenum alloy steel SCM440, an alloy steel containing chromium and molybdenum. It has the advantages of stable composition, low harmful elements, high steel purity, small decarburization layer, and few surface defects. Easy to spheroidize and has low cold cracking rate. Alloy steel SCM440 is usually hardened and tempered. The ultimate tensile strength is 850-1000Mpa. This material strikes a very good balance between strength, toughness and wear resistance. The alloy's chromium content provides good hardness penetration, while the molybdenum element imparts average hardness and high strength.
Alloy steel SCM440 responds well to heat treatment and is easy to process under heat treatment conditions. This material offers many desirable properties such as good strength and wear resistance, excellent toughness, good ductility and resistance to high temperature stress.Our company can provide SCM440 hot-rolled or forged materials, etc.