Products

H21 steel contains tungsten hot work die steel. This steel increases the Mo content by 2% and appropriately adds Mn content, which improves the high-temperature mechanical properties of the steel and adapts to the needs of mass production of aluminum alloy die-casting molds. This steel has high thermal elasticity, high thermal stability, good wear resistance and process performance, and the working temperature reaches 650℃。Our company provides alloy tool steel H21 round bar, hot rolled ASTM H21 mould steel plate etc.

Hot Work Die Steel SKD62 is an air-cooled hardening hot work die steel with good hardenability, good thermal strength, oxidation resistance, high toughness and wear resistance at medium temperatures, good cold and heat fatigue resistance, and processing properties, heat treatment properties and polishing properties.Our company provides SKD62 Steel Round Bar and SKD62 steel plates

1.2746 (45NiCrMoV16-6) steel is an alloyed cold work tool steel. It is a widely used material in various industrial applications. This steel type has high hardness and can withstand challenging conditions such as wear, impact, and high temperatures. Due to its excellent mechanical and thermal stability at elevated temperatures (500-600 °C), 1.2746 (45NiCrMoV16-6) steel is particularly preferred for components operating at high temperatures.

Our products such as cnc machining parts,casting parts,sheet metal stamping parts,forging parts,fasteners and plastic injection parts have been export to many countries like Kazakhstan，Russia, Germany, America and so on.

M42 steel is high cobalt toughness high speed steel. M42 tool steel is mainly used for high-toughness precision wear-resistant hardware cold stamping dies. M42 tool steel can also be used for cooling in cutting tools and knives. Steel has high hardness, up to 70HRC, good thermal hardness, high hardness at high temperatures, and easy grinding. Cutting tools made of this steel can cut iron-based high-temperature alloys, cast high-temperature alloys, titanium alloys and ultra-high-strength steels, etc., but the toughness is slightly poorer, and the lower limit should be used for quenching temperatures. Due to its good grindability, M42 tool steel can be used to manufacture various high-precision complex tools.our company are tool steel suppliers

T7 steel has good toughness and hardness, but poor cutting ability; it is mostly used to manufacture tools that require greater toughness and a certain hardness but do not require very high cutting ability

T8 is a carbon tool steel; hardened plastic mold steel. After quenching and tempering, it has high hardness and wear resistance, but low hot hardness, poor hardenability, easy deformation, low plasticity and strength

T10 steel is a high carbon tool steel with good hardness and wear resistance. It is suitable for making cutting tools and stamping dies. Its advantages include moderate hardness, strong toughness, low production cost, after heat treatment hardness can reach more than 60HRC. However, the hardenability of T10 Steel is low, heat resistance is poor, in the quenching heating is not easy to overheat, still maintain fine grain. In addition, toughness, strength and wear resistance are higher than T7-T9, but the thermal hardness is low, hardenability is still not high, quenching deformation

T11 steel is a kind of low hardenability cold working die steel and high carbon steel with 0.6% carbon. The steel has the advantages of good machinability, high hardness and toughness, but low hardenability and large quenching deformation. Because the steel contains less alloy elements, low tempering resistance, shallow hardening layer, and therefore low load-bearing capacity. With high hardness and wear resistance, grain growth sensitivity is small. The state of supply is hardness ≤207HBW

T12 is a carbon tool steel, due to the high carbon content, more excess carbide after quenching, according to wear resistance and hardness suitable for making tools that are not affected by impact load, cutting speed is not high, and cutting edge is not hot.

The performance and use are similar to T8 and T8A, with better hardenability and can be used to manufacture tools with larger cross-sections.

9SiCr steel has good forging properties. Because it is easy to decarburize, 9SiCr steel needs to be heated in a neutral atmosphere or protective atmosphere furnace. By applying forging heat quenching and tempering treatment, a fine tempered sorbite structure can be obtained, which simplifies the process, saves time and energy, and has both good cutting performance and ideal waste heat treatment structure.The corresponding trademark of 9SiCr steel in other countries is DIN 1.2067、DIN 100Cr6、L3 steel.